This electrode rod water level sensor probe.
Check out this step-by-step guide to help you select and buy the electrode parts for your water level sensor installation.
Sensor Parts Description
Electrode-Holder
This Electrode-Holder is the most important main housing that hold the electrode rods in place and house the rod to wiring connection.
SGD $24
SGD $38
SGD $40
Dimension
Weight: 200g
Electrode-Rod
This Electrode-Rod is the stainless steel rod. It comes in the standard portable 1m length. You can assembly them to a longer rod length with a Connecting-Nut connector, or and cut it to the specific length that you need.
SGD $10
The default material grade is Stainless Steel 304.
If you need material Stainless Steel 316 ($16) or Titanium ($37), please contact our sales engineer.
Dimension
Weight: 200g
Connecting-Nut
This Connecting-Nut is for connecting up the rods electrode to form a longer rod for your water level sensing. This nut is needed for every additional 1m that you extend from the first 1m electrode rod.
F03-02 Connecting Nut with Lock Screw.
Comes with 3 materials,
- Stainless Steel 304 ($3.60)
- Stainless Steel 316 ($5.40)
- Titanium ($11.20)
Please contact us to order this part.
We are recommending the following F03-02b as an alternative to F03-02. The lock screw tends to damage the rod thread after locking. The following F03-02b is a better option for connecting the rods.
SGD $3
The default material grade is Stainless Steel 304.
If you need material Stainless Steel 316 ($4.50) or Titanium ($9.30), please contact our sales engineer.
Dimension -> M6 x length 20mm
Weight: 10g
Lock-Nut
This Lock-Nut is for providing additional tightening of the Electrode-Rod to the Connecting-Nut. It consists of 2x M6 spring washer and 2x M6 nut. 2 sets is needed for each Connecting-Nut. This additional tightening ensure that any vibration to the entire electrode water level sensor will not loosen the rod over time.
This is an optional item and is needed if the water tank generates vibration on the electrode water level sensor.
SGD $1
The default material grade is Stainless Steel 304.
If you need material Stainless Steel 316 ($1.60) or Titanium ($3.20), please contact our sales engineer.
Assembly Illustration
Weight: 5g
Rod-Isolator
The Rod-Isolator help keep the Electrode-Rod to maintain a consistent distance away from one another. It help form a rigid structure that dampens vibration or knocking to the entire water level sensor. This will help maintain a consistent sensitivity of this electrode water level sensing.
SGD $3
(limited stock)
SGD $5
SGD $6
Dimension
Weight: 35g
Base-Plate
This Base-Plate allows the Electrode-Holder to sit on and secure firmly onto the surface mounting.
This is an optional item and not critical for the operation of the water level sensing.
SGD $16
Dimension
Weight: 30g
Electrode-Holder-Cap
This Electrode-Holder-Cap is a cap cover for the electrode holder.
This is an optional item and not critical for the operation of the water level sensing. This is for use together with the part F03-12 Base-Plate.
SGD $20
Dimension
Weight: 50g
Panel-Mount-Nut
This giant Panel-Mount-Nut for securing the Electrode-Holder tight in place onto the panel.
This is an optional item and not critical for the operation of the water level sensing.
This nut is an alternative means to “F03-12 Base-Plate” to secure the Electrode-Holder.
SGD $10
Weight: 10g
Others
The standard material is SUS304, the standard length is 1 metre.
If you need a better quality material SUS316, or other specific non-standard rod length, you can contact our sales engineer for pre-ordering.
Installation Guide
Click here for the product and installation guide.
-> omron-electrode-water-level-sensor.pdf (225Kbyte)
Buy Water Level Sensor
-> Click here to buy from our online store system.
You can also Whatsapp to our sales engineer directly to place your order manually.
Use the copy button beside the product description, indicating the quantity required, the water level sensor parts that you want to buy.
Payment via PayNow. Delivery within 1-3 days.
Water Level Sensor, HS code: 902610